Sadolin PV67 Heavy Duty Varnish is a clear, fast drying two component acid-catalysed wooden floor varnish for interior use. Clear protective interior varnish for use on timber floors, bar tops and
other timbers where a very hard wearing finish is required.
Forms a very strong surface film, with good resistance to mild acids,
alkalis and alcohols. It is slip and scratch resistant, and protects against
abrasion and impact damage.
Preparation Timber surface must be suitably prepared, clean and dry, with dust,
dirt, wax and grease removed.
The timber should be allowed to acclimatise to its end-use
environment. The moisture content should not exceed 14% prior
to coating.
Application Do not apply when relative humidity is above 65% or when
temperature is below 18?C (65?F).
If there is any doubt regarding the level of humidity present, a
de-humidifier should be used prior to, during and immediately after
application of PV67 Varnish (two-component).
There must be good ventilation at ground level during and after
application.Where air circulation is poor, we recommend the use
of electric fans to assist air movement. Do not direct draughts at
the surface.
Failure to meet these requirements may adversely affect the drying,
visual quality and durability of the varnish. For the best results the
room should be dust free.
Drying Time
First coat: Touch dry : 30 minutes
Recoatable: 11/2 to 2 hours
Subsequent coats: Recoatable : 2 to 4 hours
Coverage 10-12 m2/litre on smooth planed timber.
Cleaning Brushes, tools etc. should be cleaned immediately after use with PV67
Thinner (or methylated spirits). If spilled, PV67 Varnish may be
removed immediately while still wet using PV67 Thinner.
Important Information Protect from frost.
Shelf life: (Unopened) at least 5 years from production date.
Please refer to the Technical Data Sheet for detailed information.
